Active Topics | Member List | Search | Help | Register | Login
The John Byrne Forum
Byrne Robotics > The John Byrne Forum << Prev Page of 1492 Next >>
Topic: New artwork Post ReplyPost New Topic
Author
Message
Ryan Maxwell
Byrne Robotics Member
Avatar

Joined: 16 April 2004
Location: United States
Posts: 12959
Posted: 03 October 2007 at 4:38pm | IP Logged | 1 post reply

The cover was always closed except a couple of times while I was experimenting.  Since they look like light leaks, I even put my jacket over the scanner, no luck.  Looking at three separate scans, the streaks are all in the same place.  It's a hardware problem, I'll probably have to open the sucker up and clean the scanning bar or whatever it's called.  Sorry for highjacking the thread.

Back to Top profile | search e-mail
 
Gil Dowling
Byrne Robotics Member
Avatar

Joined: 03 June 2004
Location: United States
Posts: 1087
Posted: 03 October 2007 at 4:39pm | IP Logged | 2 post reply

I noticed I got scanlines with my Mustek if I scan over 72 dpi and have other programs opened.

Back to Top profile | search
 
Gerry Turnbull
Byrne Robotics Member
Avatar

Joined: 16 April 2004
Location: Scotland
Posts: 8766
Posted: 03 October 2007 at 4:39pm | IP Logged | 3 post reply

could it be the glass ?
Back to Top profile | search | www e-mail
 
Ryan Maxwell
Byrne Robotics Member
Avatar

Joined: 16 April 2004
Location: United States
Posts: 12959
Posted: 03 October 2007 at 4:44pm | IP Logged | 4 post reply

Definitely not the glass.  I'll shut everything else down and try Gil's idea out.
Back to Top profile | search e-mail
 
Matt Reed
Byrne Robotics Security
Avatar
Robotmod

Joined: 16 April 2004
Posts: 36081
Posted: 03 October 2007 at 5:03pm | IP Logged | 5 post reply

Curious how much it costs to commission Hembeck to do a cover recreation?  Those ASM covers are awesome!
Back to Top profile | search
 
Lloyd White
Byrne Robotics Member
Avatar

Joined: 13 September 2007
Location: United States
Posts: 871
Posted: 03 October 2007 at 6:38pm | IP Logged | 6 post reply

Here is a much nicer scan of the JB page I bought recently.  Having Mr. Byrne's signature means a lot to me, as he was my first 'favorite' artist when I became old enough to realize that someone actually had to write and draw these things (ca.1970's Iron Fist and Uncanny X-Men).

I bought this piece because it reminds me of what it was like to read comics when I very first discovered them.  I'd have loved seeing this at the drug store on a Saturday afternoon with my Dad.  My pals and I so wished he'd draw Superboy!



Edited by Lloyd White on 03 October 2007 at 6:45pm
Back to Top profile | search
 
Wilson Mui
Byrne Robotics Member
Avatar

Joined: 27 June 2004
Location: United States
Posts: 4557
Posted: 03 October 2007 at 9:21pm | IP Logged | 7 post reply

Can someone tell me what is 2 ply plate bristol?  Is it the same paper used to draw comics on?
Back to Top profile | search
 
Knut Robert Knutsen
Byrne Robotics Member
Avatar

Joined: 22 September 2006
Posts: 7374
Posted: 03 October 2007 at 10:16pm | IP Logged | 8 post reply

Have you tried placing a dark, slightly heavy (but not too heavy) hardcover book on top of the art to flatten it against the scanner's glass? I had that problem with an earlier scanner (though strangely not with my Mustek A3) where I needed to make sure there was no "air" between the glass and the artwork. The scanner sort of created it's own "glare effect" when the art was just slightly "buckled".
Back to Top profile | search
 
Glenn Brown
Byrne Robotics Member
Avatar

Joined: 16 April 2004
Location: United States
Posts: 3095
Posted: 03 October 2007 at 10:53pm | IP Logged | 9 post reply

Bristol board is the standard type of paper that comics are drawn on.  It's not as heavy or thick as cold-press board or cardboard, but sturdier than regular paper.

The term "plate" refers to the surface texture of the board.  Plate bristol has a smoother surface than regular finish, which is also known as "kid" finish, which has a slightly rougher, "toothier" texture to it.  Neither is superior to the other; it's a matter of preference and taste which type of paper is preferred by artists.  Inkers tend to prefer the plate finish, because pen nibs and crowquills can snag in textured paper and cause unwanted splatters.

The term "ply" refers to the number of layers comprising the board.  Each thin layer, or ply, creates a thicker, sturdier board.  Two ply is standard because it's sturdy enough to stand up to heavy erasing and inking, and yet is still thin enough to be used effectively on a lightbox.  Heavier paper is more difficult to see through, but better for paint and ink wash finishes.

Strathmore is the industry standard although different artists have different preferences in brands as well as types of paper.  Canson also makes a good board.
Back to Top profile | search | www e-mail
 
Wilson Mui
Byrne Robotics Member
Avatar

Joined: 27 June 2004
Location: United States
Posts: 4557
Posted: 04 October 2007 at 4:36am | IP Logged | 10 post reply

Thanks for the answer, Glenn.
Back to Top profile | search
 
David Ferguson
Byrne Robotics Member
Avatar

Joined: 17 March 2007
Location: Ireland
Posts: 6782
Posted: 07 October 2007 at 7:57am | IP Logged | 11 post reply

A sketch my friend got at the latest Irish convention.

Sort of a preview of an upcoming issue.


Back to Top profile | search
 
John Peter Britton
Byrne Robotics Member
Avatar

Joined: 17 May 2006
Location: United Kingdom
Posts: 9129
Posted: 07 October 2007 at 9:52am | IP Logged | 12 post reply

Thats a nice Nazi Ape youv'e got there David.
Back to Top profile | search e-mail
 

<< Prev Page of 1492 Next >>
  Post ReplyPost New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

 Active Topics | Member List | Search | Help | Register | Login