Author |
|
Ryan Maxwell Byrne Robotics Member
Joined: 16 April 2004 Location: United States Posts: 12960
|
Posted: 03 October 2007 at 4:38pm | IP Logged | 1
|
post reply
|
|
The cover was always closed except a couple of times while I was experimenting. Since they look like light leaks, I even put my jacket over the scanner, no luck. Looking at three separate scans, the streaks are all in the same place. It's a hardware problem, I'll probably have to open the sucker up and clean the scanning bar or whatever it's called. Sorry for highjacking the thread.
|
Back to Top |
profile
| search
e-mail
|
|
Gil Dowling Byrne Robotics Member
Joined: 03 June 2004 Location: United States Posts: 1087
|
Posted: 03 October 2007 at 4:39pm | IP Logged | 2
|
post reply
|
|
I noticed I got scanlines with my Mustek if I scan over 72 dpi and have other programs opened.
|
Back to Top |
profile
| search
|
|
Gerry Turnbull Byrne Robotics Member
Joined: 16 April 2004 Location: Scotland Posts: 8766
|
Posted: 03 October 2007 at 4:39pm | IP Logged | 3
|
post reply
|
|
could it be the glass ?
|
Back to Top |
profile
| search
| www
e-mail
|
|
Ryan Maxwell Byrne Robotics Member
Joined: 16 April 2004 Location: United States Posts: 12960
|
Posted: 03 October 2007 at 4:44pm | IP Logged | 4
|
post reply
|
|
Definitely not the glass. I'll shut everything else down and try Gil's idea out.
|
Back to Top |
profile
| search
e-mail
|
|
Matt Reed Byrne Robotics Security
Robotmod
Joined: 16 April 2004 Posts: 36087
|
Posted: 03 October 2007 at 5:03pm | IP Logged | 5
|
post reply
|
|
Curious how much it costs to commission Hembeck to do a cover recreation? Those ASM covers are awesome!
|
Back to Top |
profile
| search
|
|
Lloyd White Byrne Robotics Member
Joined: 13 September 2007 Location: United States Posts: 871
|
Posted: 03 October 2007 at 6:38pm | IP Logged | 6
|
post reply
|
|
Here is a much nicer scan of the JB page I bought recently. Having Mr. Byrne's signature means a lot to me, as he was my first 'favorite' artist when I became old enough to realize that someone actually had to write and draw these things (ca.1970's Iron Fist and Uncanny X-Men).
I bought this piece because it reminds me of what it was like to read comics when I very first discovered them. I'd have loved seeing this at the drug store on a Saturday afternoon with my Dad. My pals and I so wished he'd draw Superboy!
Edited by Lloyd White on 03 October 2007 at 6:45pm
|
Back to Top |
profile
| search
|
|
Wilson Mui Byrne Robotics Member
Joined: 27 June 2004 Location: United States Posts: 4557
|
Posted: 03 October 2007 at 9:21pm | IP Logged | 7
|
post reply
|
|
Can someone tell me what is 2 ply plate bristol? Is it the same paper used to draw comics on?
|
Back to Top |
profile
| search
|
|
Knut Robert Knutsen Byrne Robotics Member
Joined: 22 September 2006 Posts: 7374
|
Posted: 03 October 2007 at 10:16pm | IP Logged | 8
|
post reply
|
|
Have you tried placing a dark, slightly heavy (but not too heavy) hardcover book on top of the art to flatten it against the scanner's glass? I had that problem with an earlier scanner (though strangely not with my Mustek A3) where I needed to make sure there was no "air" between the glass and the artwork. The scanner sort of created it's own "glare effect" when the art was just slightly "buckled".
|
Back to Top |
profile
| search
|
|
Glenn Brown Byrne Robotics Member
Joined: 16 April 2004 Location: United States Posts: 3095
|
Posted: 03 October 2007 at 10:53pm | IP Logged | 9
|
post reply
|
|
Bristol board is the standard type of paper that comics are drawn on. It's not as heavy or thick as cold-press board or cardboard, but sturdier than regular paper.
The term "plate" refers to the surface texture of the board. Plate bristol has a smoother surface than regular finish, which is also known as "kid" finish, which has a slightly rougher, "toothier" texture to it. Neither is superior to the other; it's a matter of preference and taste which type of paper is preferred by artists. Inkers tend to prefer the plate finish, because pen nibs and crowquills can snag in textured paper and cause unwanted splatters.
The term "ply" refers to the number of layers comprising the board. Each thin layer, or ply, creates a thicker, sturdier board. Two ply is standard because it's sturdy enough to stand up to heavy erasing and inking, and yet is still thin enough to be used effectively on a lightbox. Heavier paper is more difficult to see through, but better for paint and ink wash finishes.
Strathmore is the industry standard although different artists have different preferences in brands as well as types of paper. Canson also makes a good board.
|
Back to Top |
profile
| search
| www
e-mail
|
|
Wilson Mui Byrne Robotics Member
Joined: 27 June 2004 Location: United States Posts: 4557
|
Posted: 04 October 2007 at 4:36am | IP Logged | 10
|
post reply
|
|
Thanks for the answer, Glenn.
|
Back to Top |
profile
| search
|
|
David Ferguson Byrne Robotics Member
Joined: 17 March 2007 Location: Ireland Posts: 6782
|
Posted: 07 October 2007 at 7:57am | IP Logged | 11
|
post reply
|
|
A sketch my friend got at the latest Irish convention.
Sort of a preview of an upcoming issue.
|
Back to Top |
profile
| search
|
|
John Peter Britton Byrne Robotics Member
Joined: 17 May 2006 Location: United Kingdom Posts: 9129
|
Posted: 07 October 2007 at 9:52am | IP Logged | 12
|
post reply
|
|
Thats a nice Nazi Ape youv'e got there David.
|
Back to Top |
profile
| search
e-mail
|
|