| Author |
|
jose alicea
Byrne Robotics Member
Joined: 16 November 2008
Location: United States
Posts: 115
|
| Posted: 23 November 2008 at 1:44pm | IP Logged | 1
|
post reply
|
|
WOW.Those commissions are amazing.John never fails.
|
| Back to Top |
profile
| search
|
| |
Stephen Bergstrom
Byrne Robotics Member
Joined: 18 December 2004
Location: United States
Posts: 522
|
| Posted: 24 November 2008 at 5:22am | IP Logged | 2
|
post reply
|
|
Speaking as an ex-professional picture framer, for 20x30 art, it could be matted into a 24x36 frame, if you don't mind the mat being somewhat uneven. One could make the top and sides even at 2" apiece, and the bottom would be 4", which is known in the industry as a "weighted" bottom. That particular practice got started when it became apparent that hanging art high up on a very tall wall made the bottom of the mat look narrower than the other three sides, thanks to foreshortening. At least, that's how it was explained to me, although I would think that the top of the mat would look even narrower, but what the hey. If you can find a frame that works with your art, a ready-made frame is certainly the economical choice.
If the virtues of acid-free mats haven't already been made known to you, I highly recommend them, especially with regards to original art. Most paper contains lignin, which is an acidic substance that is responsible for the yellowing of paper over time. Even though white paper has been bleached to remove most of the lignin, enough remains for the yellowing to occur. The acid-free mats contain alkaline substances that help to combat this process.
U/V protective, or ultraviolet protective, glass is also a good choice for artwork protection. The vast majority of the fading of pigments can be attributed to the ultraviolet spectrum of light. To help reduce this, U/V glass has been treated with a special film that blocks up to 98% of the available U/V rays, depending on the source. Direct sunlight will still fade artwork, even with this glass, so be wary of the frame salesman who will assure you that the hyper-expensive "museum glass" will protect the art from direct sunlight. Pure hyperbole. The sun is nasty to art, and nothing short of opaque products will protect it, and that doesn't promote viewing. U/V protective glass is for places where low-level direct lighting and high-level indirect lighting is all that will touch your art.
I noticed that some of the art posted here appears to be framed in non-glare glass. Unless this is also U/V treated, it is actually worse for your art than regular glass. Think about it. Instead of reflecting the light back, it's refracting more of it onto the art, and although visible light doesn't do as much damage as U/V rays, it will still contribute to fading.
Since this is turning into a very long post, I'll simply close with this: There is a professional organization, the PPFA (Professional Picture Framers Association) that is dedicated to the promotion and advancement of picture framing techniques. Any frame shop that boasts a Certified Picture Framer is completely versed in conservation framing, and any piece that is framed using conservation methods by such an individual is likely to ensure that the art will keep in its present condition for decades.
Hope this helped.
Edited by Stephen Bergstrom on 24 November 2008 at 5:26am
|
| Back to Top |
profile
| search
|
| |
Wilson Mui
Byrne Robotics Member
Joined: 27 June 2004
Location: United States
Posts: 4562
|
| Posted: 24 November 2008 at 5:44am | IP Logged | 3
|
post reply
|
|
Great advice, Stephen. Thank you for the post!
|
| Back to Top |
profile
| search
|
| |
Wilson Mui
Byrne Robotics Member
Joined: 27 June 2004
Location: United States
Posts: 4562
|
| Posted: 08 December 2008 at 6:49pm | IP Logged | 4
|
post reply
|
|
Here are my pieces....
When I hung up the Spider-Man piece in my kid's playroom, my daughter told me I had it upside-down.
Edited by Wilson Mui on 08 December 2008 at 6:56pm
|
| Back to Top |
profile
| search
|
| |
Brad Brickley
Byrne Robotics Member
Joined: 29 April 2004
Location: United States
Posts: 8290
|
| Posted: 08 December 2008 at 10:24pm | IP Logged | 5
|
post reply
|
|
Maybe put the Spider-Man on the ceiling, then it'd look right!
|
| Back to Top |
profile
| search
| www
|
| |
Clint Ludwick
Byrne Robotics Member
Joined: 17 April 2007
Location: United States
Posts: 1952
|
| Posted: 09 December 2008 at 8:15am | IP Logged | 6
|
post reply
|
|
Brad....pretty cool idea!
|
| Back to Top |
profile
| search
e-mail
|
| |
Flavio Sapha
Byrne Robotics Member
Joined: 16 April 2004
Location: Brazil
Posts: 12912
|
| Posted: 09 December 2008 at 8:29am | IP Logged | 7
|
post reply
|
|
Genius!
|
| Back to Top |
profile
| search
|
| |
Clint Ludwick
Byrne Robotics Member
Joined: 17 April 2007
Location: United States
Posts: 1952
|
| Posted: 21 December 2008 at 12:59pm | IP Logged | 8
|
post reply
|
|
updated pic on page 3.
Edited by Clint Ludwick on 26 December 2008 at 2:21pm
|
| Back to Top |
profile
| search
e-mail
|
| |
Bill Brown
Byrne Robotics Member
Joined: 10 September 2008
Posts: 533
|
| Posted: 21 December 2008 at 1:54pm | IP Logged | 9
|
post reply
|
|
any special sequence here Clint? Like, so the frames spell words or something (LOL)?
|
| Back to Top |
profile
| search
|
| |
Clint Ludwick
Byrne Robotics Member
Joined: 17 April 2007
Location: United States
Posts: 1952
|
| Posted: 21 December 2008 at 3:04pm | IP Logged | 10
|
post reply
|
|
Actually, I tried to do my best to rotate "classic" monster, Marvel monster, "classic" monster, etc....if that makes sense.
The question is....other than Ghost Rider, who's missing? I know 1 will be a surprise!
|
| Back to Top |
profile
| search
e-mail
|
| |
Joe Hollon
Byrne Robotics Member
Joined: 08 May 2004
Location: United States
Posts: 13707
|
| Posted: 21 December 2008 at 3:12pm | IP Logged | 11
|
post reply
|
|
"The question is....other than Ghost Rider, who's missing? I know 1 will be a surprise!"
****
A surprise to you or a surprise to us? Are you asking for more suggestions? I always have ideas...
Oh, and they look awesome together on the wall! Great job!
Edited by Joe Hollon on 21 December 2008 at 3:14pm
|
| Back to Top |
profile
| search
| www
e-mail
|
| |
Joakim Jahlmar
Byrne Robotics Member
Joined: 10 October 2005
Location: Sweden
Posts: 6080
|
| Posted: 21 December 2008 at 5:13pm | IP Logged | 12
|
post reply
|
|
Awesome wall, Clint!!!
And if I count correctly, there'll be two more "classic" monsters and one more Marvel monster. Beats me what they'll be though, but as always looking forward to seeing them. :)
|
| Back to Top |
profile
| search
| www
|
| |
